ANTI-SLIP PROTECTION & CONTRAST MARKINGS
Weland offers most products needed to increase security and accessibility in various environments.
To increase the safety and accessibility in various environments, we have developed products such as, for example, anti-slip protection for gratings, combined contrast marking and anti-slip protection for ramps, staircases etc.
The products are available in different versions for varying areas of use.
Metal anti-slip strip
Slippery staircases and surfaces can be supplemented with this anti-slip strip in sheet metal. The strip has punched holes for increased anti-slip protection. The strip can also be used as contrast marking on stair treads where this is lacking. The strip is screwed to the underlying surface. We recommend c/c 300 mm spacing between the anti-slip strips.
Finish: Hot dip galvanized
| Length x Width (mm) | Part no. | Stocked |
|---|---|---|
| 791 x 40 | HS0801 | |
| 991 x 40 | HS1001 | |
| 1191 x 40 | HS1201 |
Contrast Marking Non-slip
Contrast marking in black painted punched sheet metal. The profile is easy to fit to our staircases and steel ramps. Fastening material not included. Contrast marking is also available in other colours to order.
Finish: Painted
| Length x Width (mm) | Part no. | Stocked |
|---|---|---|
| 480 x 80 | 174804803 | |
| 580 x 80 | 174805801 | |
| 680 x 80 | 174806803 | |
| 780 x 80 | 174807803 | |
| 880 x 80 | 174808803 | |
| 980 x 80 | 174809803 | |
| 1080 x 80 | 1748010803 | |
| 1180 x 80 | 1748011803 | |
| 1280 x 80 | 1748012803 | |
| 1380 x 80 | 1748013803 | |
| 1480 x 80 | 1748014803 |
Anti-slip protection for grating
In winter, some gratings can become slippery through damp and ice. This particularly applies to entry gratings and staircases in exposed locations. Weland has now developed a solution to the problem. Anti-slip protection in pressed stainless steel that can be pressed into place on the grate without any tools. The upper side has holes with upward pressed edges, providing very good anti-slip protection. The anti-slip protection is suitable for gratings with H and N mesh widths (c/c 33 and 17 mm) and A gratings with 33 x 11 mm mesh. Available for 20, 25 and 30 mm high gratings. We recommend 40 anti-slip inserts per m².
Finish: Stainless steel
| For plank type | Length x Width (mm) | Part no. | Stocked |
|---|---|---|---|
| Grating A33x11 | 60 x 40 | HS10 | |
| Grating height 20 mm | 60 x 40 | HS20 | |
| Grating height 25 mm | 60 x 40 | HS25 | |
| Grating height 30 mm | 60 x 40 | HS30 |
Anti-slip protection, Black brush
Suitable for mesh opening 25 x 9 with load bearing steel dimensions 2 to 3 mm. Dimensions 23 x 7 mm. We recommend 400-700 brushes per m², depending on the type of grating. This variant of anti-slip protection is not dependent on any specific mesh size.
| Length x Width (mm) | Part no. | Stocked |
|---|---|---|
| 23 x 7 | HSBORST |
