UNIVERSAL RAILING, PLANNING AND DESIGN
The railings are normally delivered from stock and are easily adapted by the fitter. This makes it possible to install without making detailed measurements prior to delivery. If the railings are to be delivered customised from the factory, each universal railing is drawn up specially and the drawing is sent to the customer for approval prior to manufacturing.
UNIVERSAL RAILING, PLANNING AND DESIGN
The railings are normally delivered from stock and are easily adapted by the fitter. This makes it possible to install without making detailed measurements prior to delivery. If the railings are to be delivered customised from the factory, each universal railing is drawn up specially and the drawing is sent to the customer for approval prior to manufacturing.
Filtration
Assembly
For joining Universal railing, there are many different assembly accessories available based on your needs.
Fixing, Top Installation
Intended to be screwed into e.g. wood or concrete. Can be welded in place.
To secure the railing post, a bolt, a locking washer and a nut are required.
Finish: Hot dip galvanized
Name | Dimensions (mm) | Part no. | Stocked |
---|---|---|---|
Single | 125 x 125 x 108 | UG1000 | |
Double | 200 x 125 x 108 | UG2000 |
Fixing, Side Installation
Intended to be screwed into e.g. wood or concrete. Can also be welded in place.
The side brackets are available in right and left hand versions. The right bracket is located to the right when looking at the installation side. The fixing has a serrated post to facilitate installation at the correct height.
To secure the railing post, a bolt, a locking washer and a nut are required.
Finish: Hot dip galvanized
Name | Dimensions (mm) | Part no. | Stocked |
---|---|---|---|
Left | 80 x 35 x 280 | UV1001 | |
Right | 80 x 35 x 280 | UV1002 |
Name | Part no. | Stocked |
---|---|---|
Locking washer, 10 pcs. | UL4201 | |
Bolt set, 10 pcs. | BU1201 | |
Nut, set 10 pcs. | MU1001 |
Wall mount
For ending the railing against a wall or post. The wall mount is available for handrails and intermediate rails.
Finish: Hot dip galvanized
Name | Dimensions (mm) | Part no. | Stocked |
---|---|---|---|
Bracket handrail | 35 x 59,2 | UV4200 | |
Bracket intermediate rail | 20 x 39,7 | UV2700 |
Ground mount
The mount is manufactured from folded sheet metal and it provides stable fixing when sunk into the ground with macadam or crushed stone in the pit. The mount can also be used for embedding in concrete.
The mount is available in single and double versions.
Finish: Hot dip galvanized
Name | Part no. | Stocked |
---|---|---|
Ground attachment, single 42 mm | UM1000 | |
Ground attachment, double 42 mm | UM2000 |
Kick strip
Kick strips are available for all railing lengths, as well as for railing corners. The kick strip is attached to the railing bow using self-tapping screws.
Height: 100 mm
Finish: Hot dip galvanized
Name | Length (mm) | Part no. | Stocked |
---|---|---|---|
Kick strip | 390 | SL0410 | |
Kick strip | 490 | SL0510 | |
Kick strip | 690 | SL0710 | |
Kick strip | 990 | SL1010 | |
Kick strip | 1490 | SL1510 | |
Kick strip | 1990 | SL2010 | |
Kick strip, Corner railing | 335,6 x 335,6 | SL4040 |
Name | Dimensions | Height (mm) | Part no. | Stocked |
---|---|---|---|---|
Concrete base | 350 x 240 | 125 | BF2000 |
Connections
Connection between railings is carried out by linking them together with a sleeve and a through bolt. All railings have pre-drilled holes. Railings that are not installed in a straight line are linked together with a corner connection that clamps around the railing balusters.
We also offer corner connections.
Finish: Hot dip galvanized
Name | Part no. | Stocked |
---|---|---|
Coupling | KP4277 | |
Corner coupling | MK4200 |
Internal pin
Used for embedding in the floor structure, walls or if you want to weld to the edge of the floor structure. Can also be used to extend the extension pin down into the sleeve that lies flush with the floor. The pin is locked to the railing with a bolt, nut and washer to the railing baluster in the same way as other brackets.
Finish: Hot dip galvanized
Name | Length (mm) | Part no. | Stocked |
---|---|---|---|
Invändig tapp | 310 | UT3100 |
Railing joint
For joining railing and intermediate rails.
Finish: Hot dip galvanized
Name | Part no. | Stocked |
---|---|---|
Splice kit 42 mm hdg. | SK4200 | |
Splice kit tube 27 mm hdg. | SK2700 |